Desiccant Air Dryers

  • Heatless - DGH Series

    Heatless – DGH Series

    DGH Series Heatless desiccant dryers open up a world of customizable performance opportunities with four standard ISO quality class levels of pressure dew points to choose from.  Don’t settle for less than the ability to satisfy all of your requirements for clean, dry compressed air.  A carefully engineered desiccant dryer design provides a reliable method to remove moisture as a water vapor using desiccant such as activated alumina or silica gel.

  • Blower Purge - DPB Series

    Blower Purge – DPB Series

    The DPB Series blower purge desiccant dryer process design offers the end user the opportunity to significantly reduce the energy costs associated with achieving a reliable -40°F (-40°C) pressure dew point. This is achieved by eliminating or reducing purge air requirements (compressed air utilized to regenerate desiccant beds) typical of other desiccant dryer designs.

  • Dual Tower - GDHM Series

    Dual Tower – GDHM Series

    The GDHM Series desiccant air dryers use the proven “Pressure Swing Adsorption” (PSA) method for drying wet compressed air.  This requires having two identical towers containing hygroscopic desiccant. The unique energy saving design can start and stop dryer with a compressor or point-of-use equipment to eliminate purge loss when off.

  • 50Hz Adsorption Dryers

    50Hz Adsorption Dryers

    Gardner Denver 50Hz heat regenerative adsorption dryers are for higher volume flows. No loss of compressed air. Ambient air is used for regeneration of the adsorption vessel. Latest control technology guarantees cost-optimized and secure purification at constant pressure dew points.

  • Single Tower - DST Series

    Single Tower – DST Series

    The DST Series single tower desiccant air dryer provides quality air to your application with minimal investment. The compact, in-line design is ideally suited for point of use applications, such as paint spraying operations or pneumatic tools, which require clean, dry compressed air. The modular housings, with optional oil removal pre-filter, provide ease of installation to any system.

  • Externally Heated - DHP Series

    Externally Heated – DHP Series

    The DHP Series of blower purge desiccant air dryers ensures that your dry air requirements are met. The DHP can provide you with ISO 8573.1 Class 2 dewpoints. Couple your DHP dryer with the appropriate FIL filtration to achieve up to ISO 8573.1 Class 1 for solids and oils.